When starting your design phase, ask yourself this question:
How will the label be used?
- Width ?
- Length ?
- Corner radius
There are 2 ways to run this label: With the mandatory liner width of 3.125″, or the mandatory width of 1.125″ running across the web. Typically 1/16″ is left on each side of the cavity.
Label Die Close – Up
An example of a die is shown below.
Label production is more efficient when there are more cavities across the die.
Please note: The specifications for the gap between labels are made when the die is ordered. No adjustments can be made to the label once the die is ordered, unless a new die is manufactured.